beautypg.com

Step 1: connect your equipment – Buffalo Technology Buffalo AirStation Nfiniti WZR-G300N User Manual

Page 2

background image

1

. Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or

DSL modem.

2

. Connect the Ethernet cable from your cable or DSL modem to the WAN port on your

AirStation. The WAN port is the port closest to the power connector. This is the only port that

will work for your internet connection.

3

. Connect one or more PCs or workstations to any of the four LAN ports on the AirStation with

RJ-45 Ethernet cables.

4

. Power on the cable or DSL modem. Give it at least a minute to boot up.

5

. Connect the power connector to the power port on the AirStation and to a surge protector or

other source of power. Give the AirStation 60 seconds to boot.

Step 1: Connect Your Equipment

See also other documents in the category Buffalo Technology Hardware: