JLG 860SJ Operator Manual - Manual (Page 61)

SECTION 4 - MACHINE OPERATION
3121138 – JLG Lift – 4-3
Shutdown Procedure
IF AN ENGINE MALFUNCTION CAUSES AN UNSCHEDULED SHUTDOWN,
DETERMINE THE CAUSE AND CORRECT IT BEFORE RESTARTING THE
ENGINE.
1. Remove all load and allow engine to operate at low
speed for 3-5 minutes; this allows further reduction of
internal engine temperature.
2. Push POWER/EMERGENCY STOP switch in.
3. Turn MASTER switch to Off.
Refer to Engine Manufacturer’s manual for detailed informa-
tion.
.
Figure 4-1. Position of Least Backward Stability
ROTATE PLATFORM
90 DEGREES
BOOM FULLY
ELEVATED
TURNTABLE ROTATED
90 DEGREES FROM
STOWED POSITION
MACHINE WILL TIP OVER IN
THIS DIRECTION IF OVERLOADED
OR OPERATED
ON AN OUT-OF-LEVEL SURFACE