Broilmaster SBB2804-1 - Manual (Page 11)

SBB00104-3-0309 Page 11
1. The grill is shipped with the surround and the grill head at-
tached by four screws as shown in the drawing below. Please
remove the four screws to seperate the surround from the grill
head. See Figure 1.
2. Place the SBB surround into position in the constructed
enclosure. See Figure 2.
Figure 2
Figure 3
SURROUND ASSEMBLY
3. Secure the SBB surround to the enclosure using up to
eight screws (not provided). See Figure 3.
Note: If you have a masonry structure you may need to
substitute for the appropriate masonry fasteners.
Figure 1