JLG 450A_AJ Series II Parts Manual - Manual (Page 259)

SECTION 4 - PLATFORM
3121244 450A Series II/450AJ Series II 259
FIGURE 4-1. PLATFORM INSTALLATION
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM ASSEMBLY WITH GATE
3510832 Ref 6ft (1.83m) with No Mesh (Use p/n 1001144025) B-L
3510831 Ref 5ft (1.52m) with No Mesh (Use p/n 1001144026) B-L
3510830 Ref 4ft (1.22m) with No Mesh (Use p/n 1001144027) B-M
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform before
ordering parts.
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement Decals Must be Ordered Separately - See
DECALS SECTION.
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3820020 2 Rivet, Pop
6 See Note 1 Platform Weldment (Note: Purchase Platform Assembly)
7 3520072 1 Cap-Plug
11 Ref Gate Weldment Options:
11 4846452 1 Gate for Original Equipment Platform p/n 3510830, 3510831,
3510832
11 1001144629 1 Gate for Service Replacement Platform p/ns 1001144025,
1001144026, 1001144027
12 3520198 2 Plug, Square Tube
Ref PLATFORM ASSEMBLY WITH DROP-BAR
1001138433 Ref 6ft (1.83m) with No Mesh (Use p/n 1001144020) B-B
1001138432 Ref 5ft (1.52m) with No Mesh (Use p/n 1001144019) B-B
1001138431 Ref 4ft (1.22m) with No Mesh (Use p/n 1001144018) B-B
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement Decals Must be Ordered Separately - See
DECALS SECTION.
51 0100011 AR Compound, Locking
52 0641418 2 Bolt 1/4in-20NC x 2-1/4in
53 0961845 2 Bushing
54 3290606 2 Nut M6
55 3300151 2 Nut, Acorn
56 See Note 1 Platform Weldment (Note: Purchase Platform Assembly)
57 3520198 2 Cap-Plug
58 4010618 2 Screw M6 x 50mm
59 4711400 4 Flatwasher 1/4in
60 4811700 2 Flatwasher M6
61 1001138494 1 Bar, Drop
62 1001138514 1 Rail (Top)
63 1001140429 1 Decal - Drop-Bar
Ref CONSOLE BOX AND FOOTSWITCH INSTALLATION
Ref Note: For Module (with/without UGM) Identification, refer to
Revision Log page A.
Ref Note: All Romanian Built Machines are built with UGM.
Ref Without UGM
0271931 Ref Deutz/GM Engines - USA Built Machines (SN 0300124000 C