JLG M4069 Operator Manual - Manual (Page 80)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-16 – JLG Lift – 3121638
Wheel nuts should be torqued after first 50 hours of operation
and after each wheel removal. Check torque every 3 months
or 150 hours of operation.
Table 6-11. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
40-50 ft lbs
(60-70 Nm)
90-105 ft lbs
(125-150 Nm)
145-170 ft lbs
(200-240 Nm)