Lubrication, Lubrication -11, Hydraulic oil -11 – JLG M4069 Operator Manual User Manual
Page 75: 10 lubrication specifications -11

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121638
– JLG Lift –
6-11
Lubrication
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG Industries rec-
ommends Mobilfluid 424 hydraulic oil, which has an SAE
viscosity index of 152.
NOTE:
When temperatures remain below 20° F (-7° C), JLG Indus-
tries recommends the use of Mobil DTE13.
NOTE:
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobilfluid 424 is
desired, contact JLG Industries for proper recommenda-
tions.
Lubrication Specifications
Table 6-9. Hydraulic Oil
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
SAE VISCOSITY GRADE
0° to +23° F
(-18° to -5° C)
10W
0° to +210° F
(-18° to +100° C)
10W-20, 10W-30
+50° to +210° F
(+10° to +100° C)
20W-20
Table 6-10. Lubrication Specifications
KEY
SPECIFICATIONS
MPG
Multipurpose Grease having a minimum dripping point of
350° F. Excellent water resistance and adhesive qualities,
and being of extreme pressure type. (Timken OK 40
pounds minimum.)
EPGL
Extreme Pressure Gear Lube (oil) meeting API service clas-
sification GL-5 or MIL-Spec MIL-L-2105.
EO
Engine (crankcase) Oil. Gas - API SF/SG class, MIL-L-2104.
Diesel - API CC/CD class, MIL-L-2104B/MIL-L-2104C.
HO
Hydraulic Oil. API service classification GL-3, e.g. Mobil
424.