Eppendorf Multipette M4 - Manual (Page 2)

Short Instructions
Eppendorf Multipette
® M4 / Repeater ® M4
English (EN)
Your local distributor: www.eppendorf.com/contact
Eppendorf AG · 22331 Hamburg · Germany
[email protected] · www.eppendorf.com
Eppendorf
®
and the Eppendorf logo ar
e r
egister
ed tr
ademarks of Eppendorf A
G.
4982 900.102-01/062013
Insert Combitip advanced
Volume selection and steps
Filling the Combitip advanced and reverse stroke
Dispensing procedure
Emptying and ejecting the Combitip advanced
* For special procedure for partially filled Combitips advanced refer to the operating manual for Multipette M4/Repeater M4.
• For 25 mL und 50 mL Combitips advanced
only
Before inserting fit the Adapter advanced and
tighten.
Identical color code for Adapter advanced and
Combitip advanced:
red = 25 mL
light gray = 50 mL
• Easy to insert
Push and hold the operating lever while
inserting the Combitip advanced
Select the dispensing volume using the
selection dial.
Display of
• steps: possible dispensing steps*
• volume in μL oder mL
The volume can be changed in between
dispensing steps.
1. Filling
Immerse the Combitip advanced into the liquid
to be aspirated and pull the filling lever slowly
up as far as it will go. The display flashes.
2. Reverse stroke
Push the operating lever and trigger a reverse
stroke.*
The reverse stroke is not a dispensing step!
After reverse stroke: Display does not flash -
display of steps: 0
Push the operating lever slowly as far as it will go.
steps* displays the dispensing steps that were
carried out.
1. Push the filling lever down as far as it will go.
This will empty the Combitip advanced.
2. Push the operating lever to eject the
Combitip advanced.
3. For 25 mL and 50 mL Combitip advanced:
Release the Adapter advanced from the
Combitip advanced.
Mu
lt ip e tt e ® M4
1
2,5 mL
1 ≙ 50 μL
1.
2.
1 2 3 4 6 5
Mu lt ip e tt e ® 4
1
M u ltip
et te ® M 4
1
M u lti p ette ® M 4
1. 2.