Eppendorf Thermoblock for slides DC - Manual (Page 6)

6
5. Position the pressure plate on top of the Thermoblock for slides DC and
push it firmly into the location ridges.
Hold both plate and thermoblock tightly and alternately fasten both screws
completely using the screwing tool (Figure 3).
Figure 3: Schematic drawing of the Thermoblock for slides DC assembly and the
screwing tool.
Screwing tool
Pressure plate
Pressure plate
location ridge
Pressure plate
location ridge
for slides DC
assembly
Thermoblock
3 Mounting
ThermoblSlides_DC.fm Seite 6 Dienstag, 16. August 2005 8:27 08