Eppendorf Thermoblock slides - Manual (Page 7)

16
To clean the exchangeable Thermoblock slides, switch off the power supply and
pull the plug.
Ascertain that the surface of the opened exchangeable Thermoblock and its
underside as well as the thermal base on the basic device have cooled down
completely. There is otherwise a danger of burns.
Now screw off the block from the basic device.
Clean the slides thermoblock immediately if any liquid from samples enters the
hole. A mild soapy solution or laboratory cleaning agent can be used to clean the
block. The block should be protected from organic solvents and aggressive
chemicals. Alcohol-based disinfectants are permitted for decontamination
purposes.
When returning thermoblocks and their base units, please ensure that they have
been completely decontaminated. Go to www.eppendorf.com for more
information.
5 Cleaning / Service
ThermoblSlides.fm Seite 16 Donnerstag, 5. Juli 2007 12:05 12