Eppendorf MixMate - Manual (Page 12)

MixMate® — Operating manual
12
5 Operation
5 Operation
5.1 Overview of operating controls
Familiarize yourself with the operating controls and the display of the MixMate before using it for
the first time.
Abb. 3:Operator control elements and display
Fig. 3: Operator control elements and display
Abb. 4:Display
Fig. 4: Display
1 Soft key for MTP (384-well) 2 Soft key for PCR plates (384-well)
3 Soft key for MTP (96-well) 4 Soft key for PCR plates (96-well) and
micro test tubes (0.2 and 0.5 mL)
5 Softkey for micro test tubes (1.5 and
2.0 mL)
6 Control LED to display the selected
softkey
7 Display 8 Start/stop mixing run
9 Set the mixing frequency (speed) 10 Set the mixing duration (time)
11 Navigate in the menu 12 Call up and select menu parameters
1 Mixing time
Setting: up to 19:45 min. in 15 s
increments, from 20 min. to 59 min. in 1
min. increments, from 1.0 h to 99.5 h in 0.5
h increments, 'oo': unlimited mixing time.
2 Symbol for key lock
3 Mixing frequency
Setting: 300 to 3000 rpm in 50 rpm
increments.
4 Symbol for signal tone setting
Hint!
After switching on, the display shows the values of the last run.
EN
Operating manual