Specifications – Brother LX-910D User Manual
Page 35
- 33 -
Specifications
Model number:
LX-900/LX-910D
Processing method:
Cold pressure method
Power supply:
AC adapter (included)
USA
120V±10% (60Hz)
Output DC 18V 700mA
Min./max. width of document:
2.17” – 8.50” (55mm – 216mm)
Min./max. length of document:
3.54” – 39.4” (90mm – 1000mm)
Min./max. thickness of document:
0.004” – 0.01” (0.1mm – 0.2mm)
Film:
Refillable cartridge film
Film type:
LC-D9 (9.0”/A4 width double-side laminate)
LC-A9 (9.0”/A4 width adhesive-back laminate)
LC-M9 (9.0”/A4 width magnetic-back laminate)
LC-D5 (4.8”/A6 width double-side laminate)
LC-A5 (4.8”/A6 width adhesive-back laminate)
LC-M5 (4.8”/A6 width magnetic-back laminate)
Max number of output/cartridge:
LC-D9/A9:
About 60 sheets 11.7”/A4 paper
LC-D5/A5:
About 100 sheets7”/A6 paper
LC-M9:
About 12 sheets 11.7”/A4 paper
LC-M5:
About 20 sheets 7”/A6 paper
Document feed speed:
0.75”/sec. (19mm/sec.)
Cutting system:
Built-in cutting system with paper size detection
Side cutter units
(replaceable)
Top/bottom cutter unit
(non-replaceable)
Corner cutter unit
(replaceable – lower only)
Life of the cutter:
Side cutter units
984 feet (300m)
Top/Bottom cutter unit
About 5000 sheets (used with
adhesive back laminate film)
Corner cutter unit (Upper)
20,000 times
Corner cutter tray
3,000 times
Noise level:
35 dB (stand-by mode)
Unit dimensions:
357mm (W) * 293mm (D) * 195mm (H) (14.1” * 11.5” * 7.7”)
Unit weight (not including film
cartridge and AC adapter) 4.7kg (10.4 lbs.)