Eppendorf Heat Sealer - Manual (Page 6)

6
The delivery package contains the following items
1 Heat Sealer
1 Base Plate for 96 well PCR plates
1 Instruction Manual
1 Power lead
In order to avoid damage caused by condensation, the device may first be switched on
12 hours after setting up. This also applies to a change in location.
The Heat Sealer must stand completely stable on the work surface in a safe, dry location away
from the edge of the work surface.
Space requirement: Width: 14 cm
Depth: 15 cm
Height: 33 cm
Mains connection: An earthed wall socket for the Heat Sealer.
The mains voltage must agree with the information on the name plate.
The device must be connected to a grounded socket.
The delivery carton should be kept in order to be able to ship the device in case repairs are
necessary.
3.1 Delivery package
3.2 Setting up the device
Installation
3 Installation
3
HeatSealer_en.fm Seite 6 Montag, 13. März 2006 1:41 13