Eppendorf Heat Sealer - Manual (Page 10)

10
The device may only be opened by a qualified specialist. The device guarantee becomes
defunct with unauthorized work on the device!
The device must be switched off and the main plug pulled before maintenance or
cleaning is carried out.
The heater plate reaches temperatures of more than 50 °C very quickly. There is a
danger of burns. Wait until the temperature reaches 30 °C or less.
It should be ascertained that no liquid penetrates into the device.
Before using any cleaning or decontamination method other than that recommended by the
manufacturer, users should check with the manufacturer that the proposed method will not
damage the equipment.
You can clean the Heat Sealer cover with a cloth dipped in water, mild lab cleaner or ethanol
(methanol or formaldehyde can also be used).
Note: Do not use acetone or abrasive cleaners for cleaning!
In case of radioactive spillages, Eppendorf recommends that you use a proprietary
cleaning agent and follow the manufacturer´s instructions!
Maintenance
5 Maintenance
5
HeatSealer_en.fm Seite 10 Montag, 13. März 2006 1:41 13