Eppendorf Easypet 3 - Manual (Page 27)

Maintenance
Easypet ® 3
English (EN)
27
6.3 Preserving the battery capacity
The battery capacity can be preserved over the service life to a great extent.
6.3.1 Longer periods without operation
1. Charge the battery completely if the pipette controller is not used for a longer period of
time (> 4 weeks).
2. Recharge the battery completely every 3 months.
6.4 Replacing the rechargeable battery
Proceed as follows:
1. Slide the battery compartment lid open.
2. Remove the battery.
3. Insert a new battery.
6.5 Mounting the pipette clamp
6.6 Checking the leak tightness
1. Insert the pipette.
2. Fill the pipette with water.
3. Hold the pipette vertically.
4. Observe the pipette outlet for approx. 30 seconds.
No water may be allowed to escape.
5. If water escapes, disassemble, and carefully reassemble, the pipette clamp.
1. Push the gasket and the groove into the
filter adapter.
2. Push the wide opening of the membrane
filter into the narrow opening of the
pipette adapter.
3. Guide the aspirating cone over the
pipette adapter and turn it until it
engages.
Do not touch the pipette. Do not press the control buttons.