IKA EUROSTAR 100 digital - Manual (Page 12)

12
Technical data
EUROS
TAR 20
digital EUROS
TAR 40
digital EUROS
TAR 60
digital EUROS
TAR 100
digital EUROS
TAR 20
high speed digital
Speed range under nominal load rpm 0/30-2000 0/30-2000 0/30-2000 0/30-1300 0/150-6000
Speed adjustment ------------------------------------ Stepless ------------------------------------
Speed display ------------------------------- 7-Segment LEDs -------------------------------
Speed setting accuracy rpm ---------------------------------------- ±1 ----------------------------------------
Speed measurement deviation -------- Speed < 300 rpm: ±3 rpm / Speed > 300 rpm: ±1% ---------
Max. torque at stirrer shaft Ncm 20 40 60 100 20
Max. stirring quantity (water) ltr 15 25 40 100 20
Max. viscosity mPas 10000 30000 50000 70000 10000
Permitted on time % --------------------------------------- 100 ---------------------------------------
Nominal voltage VAC ------------------ 230±10% (EURO) / 115±10% (USA) ------------------
Frequence Hz -------------------------------------- 50/60 --------------------------------------
Max. input power W 70 118 176 186 176
Max. output power at stirring shaft W 42 84 126 136 125
Protection class acc. to
DIN EN 60529 -------------------------------------- IP 40 ---------------------------------------
Protection class ----------------------------------------- I -----------------------------------------
Excess voltage category ----------------------------------------- II -----------------------------------------
Contamination level ---------------------------------------- 2 -----------------------------------------
Protection at overload ------------------------ Yes/motor current limitation -----------------------
Fuse (on mains plate) A ---------------------- T 4 A (IKA ® Ident. No. 2585100) --------------------
Ambient temperature °C ------------------------------------ +5 to +40 -----------------------------------
Ambient humidity (rel.) % ---------------------------------------- 80 ----------------------------------------
Drive -------------------------------- Brushless motor -------------------------------
Clamping chuck-clamping range mm 0,5-10 0,5-10 0,5-10 0,5-10 
Hollow shaft internal diameter mm 11 11 11 11 -/-
Extension arm (ØxL) mm ------------------------------------- 16x220 -------------------------------------
Housing ---------- Coated aluminium casting and thermoplastic plastic --------
Dimensions (WxDxH)
(without extension arm) mm 86x208x248 86x208x248 86x208x248 86x208x248 86x208x325
Weight (with extension arm and
clamping chuck) kg 4,4 4,4 4,4 4,4 5,3
Operation at a terrestrial altitude m ------------------------------------ max. 2000 ----------------------------------
 Conical attachment for precision shaft R 6000, screw on stirring tool, (e.g. R 1401).
Subject to technical changes!