BUSH DAB+/FM/AM Digital Radio TR82DAB - Manual (Page 9)

Bush TR82DAB
9
Scanning and Storing Stations
#
Note: with a DAB+ radio, it’s a good idea to conduct a station scan every now and then to make sure that you
have the most up to date station list stored in the memory of your radio. As new stations are often added or
replaced.
In DAB+ Mode, press the Auto Button to activate a full station search. The radio will begin automatically and will
store all available stations. A bar graph will be display will searching and will indicate the number of stations found
and the scan progress.
You may see some symbols displayed alongside the stations names. These are defined as follows:
• ? ‐ This will indicate that the station is not active or available
• >> ‐ This symbol indicates that the station is a primary station with secondary services
• << ‐ This symbol indicates that the station is secondary station
Station Presets
#
Note: each preset Button holds two presets. For example, the 1/6 preset Button, on the DAB digital radio, holds
preset positions one and six.
The Bush TR82DAB Radio allows you to set up to 10 Station Presets. This means you can easily access all of your
favourite stations at a touch of a Button.
1. To store a station preset, you must first tune to the station you wish to set as a preset.
2. Then press and hold one of the preset Buttons (e.g. 1/6). Preset, # saved will appear on the third line of the
display, where the # is the number of the preset position.
3. To select the second set of preset positions – 6‐10, hold down the shift Button then press and hold the desired
preset Button.
4. If you have already saved a station in that preset position the new Selection with override the previous station
saved.