Bosch WFR 3230 - Manual (Page 69)

69
d Risk of electric shock!
Do not immerse AquaĆStop safety device in water
(contains electrically operated valve).
To prevent leaks or water damage, it is essential
to follow the instructions in this chapter!
Caution
Operate the washing machine with cold drinking
water only. Do not connect the appliance to the mixer
tap of an unpressurized hotĆwater boiler.
If in any doubt, have the water connection carried out
by an authorized technician.
The water supply hose must not be:
- Bent or squashed.
- Modified or cut through (stability can no longer be
guaranteed).
Observe the water pressure in the supply network:
- The water pressure should be between 1 and
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
- A pressure reducing valve must be installed if the
maximum water pressure is exceeded.
q Connect the water supply hose to the tap.
Subsequent to connection:
q Turn on water tap.
q Check the connection points for leaks.
Water connection
Water supply
min. 10 mm