Bosch WFR 3230 - Manual (Page 57)

57
Fault Action Possible cause
Programme does not
start. Time delay" is
indicated in the display
field.
End time selected and activated. None. Appliance starts automatically.
Clock cannot be set. Programme has already started;
when a programme has started, the
clock cannot be set.
Wait until programme ends.
Set clock:" text
remains in the display
field even though the
Menu" button has been
pressed.
The setting has switched from hours
to minutes; both selection points
have the same text.
None.
--:--" is displayed
instead of the end time
in the display field.
Clock not set. Set clock; see Page 38.
End time cannot be
l d
Clock not set. Set clock; see Page 38.
selected.
Programme has already started;
when a programme has started, the
end time can no longer be selected.
Reselect programme; see Page 41.
Before starting the programme,
select and start the desired end
time; see Page 31.
Prewash cannot be
selected.
Programme has already started;
when a programme has started,
prewash can no longer be selected.
Reselect programme; see Page 41.
Before starting the programme,
select and start Prewash: yes";
see Page 33.
A programme was selected which
does not allow prewash.
Select a programme which allows
prewash; see Page 33.
Spin speed cannot be
selected.
Spinning is already in progress;
during spinning the speed cannot be
changed.
Select speed before spinning.
Programme selector is set to
Drain"; spinning is not possible with
this programme.
If required, select another
programme.
Maximum spin speed
cannot be adjusted.
Reduced Ironing" additional option
selected. This is not a fault.
If required, delete Reduced Ironing"
additional option.
Childproof lock cannot
be selected.
The programme has already started. Childproof lock can be selected in
pause mode.