Snorkel X52RT-sn10000+ - Manual (Page 23)

OPERATOR’S MANUAL with Maintenance Information
Function Tests
18
1 Select a test area that is firm, level and free
of obstruction.
At the Ground Controls
2 Pull out the platform and ground red
Emergency Stop buttons to the on position.
3 Turn the key switch to ground control.
☉ ☉ ☉ ☉ Result: The LCD indicator will light one by
one.
4 Start the engine. See Operating Instructions
section.
Test Emergency Stop
5 Push in the ground red Emergency Stop
button to the off position.
☉ ☉ ☉ ☉ Result: The engine should turn off and no
functions should operate.
6 Pull out the red Emergency Stop button to
the on position and restart the engine.
Test Up/Down Functions and Function
Enable
The audible warnings on this machine come
from the same central alarm. The horn is a
constant tone. The descent alarm sounds at 60
beeps per minute. The alarm that goes off when
the machine is not level sounds.
7 Do not move the lift function enable switch
up. Move up and hold the platform switch.
☉ ☉ ☉ ☉ Result: No function should operate.
8 Move and hold the lift function enable
switch up. Move and hold the platform up
switch up.
☉ ☉ ☉ ☉ Result: The platform should raised .
9 Move up and hold the lift function enable
switch. Move down and hold the platform
down switch.
☉ ☉ ☉ ☉ Result: The platform should lower then stop
at the height is 2 m ( X43RT) or 3m
( X52RT). The descent alarm should
sound while the platform is lowering.
10 Move up and hold the lift function enable
switch. Move down and hold the platform
down switch.
☉ ☉ ☉ ☉ Result: The platform should lower to end. The
descent alarm should sound while the
platform is lowering.
Test the Auxiliary Lowering
11 Move up and hold the lift function enable
switch and raise the platform approximately
60 cm.
12 Push in the red Emergency Stop button to
shut off the engine.
13 Pull out the red Emergency Stop button to
the on position.
14 Move down and hold the engine start switch.
Move down and hold the platform down
switch.
☉ ☉ ☉ ☉ Result: The platform should lower.
15 Turn the key switch to platform control and
restart the engine.