Bernard Quick Disconnect Feedder End Adapter Kits 4820G - 4995 - Manual

E - Z FEED QUICK DISCONNECT
FEEDER END ADAPTOR KITS
4820G - 4995
Bernard
An Illinois Tool Works Company
449 West Corning Road, Box 667
Beecher, Illinois 60401-0667 U.S.A.
708-946-2281 Fax 708-946-6726
800-946-2281 Customer Support
800-646-6726 Fax Orders
www.bernard-welding.com
©2003 Bernard Printed in U.S.A. DFB-ADAPTOR-03.1
1. Quick Disconnect Feeder End may be connected
directly to a Bernard adaptor by threading quick
disconnect directly into adaptor. Make all necessary
power, control, and gas connections.
2. Quick Disconnect Feeder End, PN 4920 is supplied
with two long guide tubes
(PN 478 and 479) of
different I.D.’s which must be cut to the proper
length.
3 . Select the proper guide tube I.D. from the table
below.
.023-.052 Electrode Small I.D.
.062-1/8 Electrode Large I.D.
4. Install taper end toward feed rolls. If electrodes
below .045 are being used, it may be advisable to
grind a chisel point on the tapered end to guide
electrode closer to the feed rolls.
5. Procedure to determine cut length for guide tube
that extends beyond quick disconnect
(Refer to
Illustration 1):
A. Mark tube at point even with end of quick
disconnect body.
B. Remove guide tube.
C. Cut guide tube at a point 1-1/2” toward the
taper from the area marked.
D. Reinstall in adaptor and tighten set screw.
6. Procedure to determine cut length for guide tube
recessed within quick disconnect
(Refer to
Illustration 2).
A. With small rule, measure amount guide tube
is within quick disconnect body.
B. Using formula below, cut guide tube to proper
length. Shorten guide tube from end opposite
taper.
C. 1-1/2” minus distance measured inside the
quick disconnect body equals length to be
shortened.
7 . Insert the guide tube in the adaptor. Check guide
tube length as indicated in Illustration 3 for proper fit
and tighten set screw. E-Z Feed Adaptor Kits are
supplied with pre-cut guide tubes for specific
machines, as indicated below.
Mark Here
INSTALLATION INSTRUCTIONS
ILLUSTRATION 2
GUIDE TUBE WITHIN QUICK DISCONNECT
Adaptor Guide Tube
Power Socket
Quick Disconnect
Body
Control Wires
Gas Hose
Measure
ILLUSTRATION 1
GUIDE TUBE BEYOND QUICK DISCONNECT
Control Wires
Gas Hose
Adaptor
Guide Tube
Power Socket
Quick Disconnect
Body
ILLUSTRATION 3
Quick Disconnect
Body
PROPER GUIDE TUBE POSITION
Adaptor Guide Tube
Power Socket
Control Wires
Gas Hose
1 1 /
2
”
0”
1
/ 4
”
1
/ 2
”
1
”
1 1
/ 4
”
1
1
/ 2
”
1 3
/ 4
”
3
/ 4
”
2 ”
FOR USE ON ITEM PART NO. DESCRIPTION
Digimig 1 4893 Body, w/Gas Barb & O-Ring
2 4955 Guide Tube, Small I.D.
3 4965 Guide Tube, Large I.D.
4 1571 Gas Hose
5 4908 Socket
6 1566 Gas Nut
7 4912 Snap Ring
8 4942 Wire Assembly
9 1930 Oetiker Clamp
10 663 Hose Gland
11 1363 Adaptor Body
12 396 Set Screw
13 1170 Adaptor Shank
14 4979 Plug
FOR USE ON ITEM PART NO. DESCRIPTION
Linde 1 4893 Body, w/Barb & O-Ring
2 4955 Guide Tube, Small I.D.
3 4965 Guide Tube, Large I.D.
4 1571 Gas Hose
5 4972 Power Socket
6 1566 Gas Nut
7 4912 Snap Ring
8 4942 Wire Assembly
9 1930 Clamp
10 663 Hose Gland
11 1170A Adaptor Shank
12 396 Set Screw
FOR USE ON ITEM PART NO. DESCRIPTION
Lincoln LN-7, 1 4893 Body, w/Gas Barb & O-Ring
SP-200, LN-22 2 4956 Guide Tube, Small I.D.
3 4966 Guide Tube, Large I.D.
W/pre-cut 4 1571 Gas Hose
guide tubes and plug 5 4908 Socket
6 1566 Gas Nut
7 4912 Snap Ring
8 1694 Lead Assembly
(includes 4942)
9 1930 Oetiker Clamp
10 663 Hose Gland
11 295 Adaptor Body
12 396 Set Screw
13 4942 Wire Assembly
FOR USE ON ITEM PART NO. DESCRIPTION
Airco AHF-N, 1 4893 Body, w/Gas Barb & O-Ring
AHF-R, AHF-S, 2 4953 Guide Tube, Small I.D.
AHF-T, AHF-U, 3 4963 Guide Tube, Large I.D.
AHF-V, AHF-J, 4 1571 Gas Hose
AHF-L, AHF-W 5 4908 Socket
6 1566 Gas Nut
(W/pre-cut guide 7 4912 Snap Ring
tubes) 8 4942 Wire Assembly
9 1930 Oetiker Clamp
10 663 Hose Gland
11 4825 Adaptor Body
12 396 Set Screw
FOR USE ON ITEM PART NO. DESCRIPTION
Miller 542 GL 1 4893 Body, w/Gas Barb & O-Ring
Swing Arc, part 2 4958 Guide Tube, Small I.D.
079-548 3 4968 Guide Tube, Large I.D.
Porta-MIG 4 1571 Gas Hose
Millermatic 40, 50 5 4908 Socket
Migmate 6 1566 Gas Nut
Millermatic 130 7 4912 Snap Ring
Miller S-32S & 8 4996 Lead Assembly
S-32P (includes 4942)
9 1930 Oetiker Clamp
W/pre-cut guide 10 663 Hose Gland
tubes and plugs 11 1294 Adaptor Body
12 396 Set Screw
13 4942 Wire Assembly