Snorkel TL33-sn1947+ - Manual (Page 4)

4
To deploy the Outrigger
the Locking Pin should
be released using the
spring loaded clamp.
The Outrigger can then
be rotated until the
Outriggers Locking Pin
engages the lower slot.
Figure 1: Deploying the Outriggers
The Outrigger Locking Pin moves
further and strikes the limit switch
plunger when load is applied to the
Outrigger Jack.
Vertical load increases as
the Outrigger Jack is
screwed down forcing the
Locking Pin further into
the slot.
Figure 2 : Upper Control Panel
Figure 3 : Lower Control Panel
1. Emergency Stop
2. Upper Boom Buton
3.Lower Boom Button
4. Rotate Button
5. LCD Display
6. Joystick
1. Emergency Stop
2. Upper Boom Buton
3.Lower Boom Button
4. Rotate Button
5. Analog Rocker
6. Keyswitch
6
1
2
4
3
5
Joystick
4
1
2
3
5
6