Belkin PLAY F7D4302AU User Manual

Page 25

TROUblesHOOTInG, sUPPORT, anD WaRRanTY

belkin setup cannot connect my Router to the Internet .

If Belkin Setup is not able to connect the Router to

the Internet, please check the following items:

1 . Use the troubleshooting suggestions within Belkin Setup .

2 . If your ISP requires a user name and password, make sure that

you have typed in your user name and password correctly . Some

user names require that the ISP’s domain may be at the end of the

name . Example: “myname@myisp .com” . The “@myisp .com” part of

the user name may need to be typed as well as your user name .

3 . If you continue to have no Internet connection, refer

to “Manually Configuring Network Settings” in this

manual for an alternative setup method .

belkin setup completed installation, but I cannot browse the

Web . The light on the front of my Router is blinking amber .

1 . Make sure the Router is connected to your modem with an

Ethernet cable via the Router’s one WAN (modem) port .

2 . Unplug the modem from its power source and make sure

that it goes dark . Then reapply power to the modem .

3 . Unplug your Router’s power supply, wait 10 seconds,

and plug it back in . This will cause the Router to try

to reestablish communication with the modem .