Snorkel AB46E User Manual

Page 9

Pre-Operation Safety Inspection

AB46E – 0260229

Pre-Operation Safety Inspection

Note
Carefully read, understand and follow all safety rules,
operating instructions, labels and National Safety Instruc-
tions/Requirements. Perform the following steps each
day before use.

1. Open the turntable covers and inspect for damage,

fluid leaks or missing parts.

2. Check the level of the hydraulic fluid with the platform

fully lowered. The fluid level must visible in the sight

glass. Add recommended hydraulic fluid if necessary.

See “Specifications” on page 17.

3. Check that the fluid level in the batteries is correct.

See “Battery Maintenance” on page 14.

4. Verify that the batteries are charged.

5. Check that the AC extension cord has been discon-

nected from the outlet at the rear of the chassis.

6. Check that all guardrails are in place and all fasteners

are properly tightened.

7. Inspect the machine thoroughly for cracked welds

and structural damage, loose or missing hardware,

hydraulic leaks, damaged control cable and loose

wire connections.