Kinesis AC730-blk Freestyle2 V3 - Manual (Page 2)

Installation, continued
Repeat with the other side. When both V-lifters are installed, flip the keyboard gently into the upright posi-
tion, taking care not to twist the cable linking the two keying modules.
To remove V-lifters: Pull the front lip gently away from the front edge of the keying module. Lift the V-
lifter away from the keyboard until the two end tabs are free.
Adjusting the V-lifter tenting angle
The V3 V-lifters each have two hinged legs which when unsnapped provide 5 degree tenting. The legs may
be snapped together to form a rigid “V,” providing 10 or 15 degree tenting.
5 degree tenting: To use the 5 degree angle, pull the short and long support legs apart to release the snaps.
The legs will fold flat from the weight of the keyboard to provide a stable 5 degree tenting angle.
10 and 15 degree tenting: To change from 5 degree tenting, simply snap the two legs of each V-lifter to-
gether to form a rigid “V.” To change between the 10 and 15 degree angles, lift each keying module
slightly and flip its V-lifter to the higher (15 degree, single leg support) or lower (10 degree, two leg sup-
port) position.
Removing Pivot Tether
The Pivot Tether may be removed if you want to completely
separate the keying modules. Place the keyboard on a flat, pad-
ded surface and slide the release button on the top rear of a key-
ing module. Lift that keying module to release it from the pivot
tether. To remove the pivot tether completely, slide the other
release button and the Pivot Tether should fall out.
Trouble shooting and Technical Support
If the V-lifters seem unstable or protrude beyond the edge of the keyboard, you may have installed them on
the “wrong” sides. Try swapping left and right V-lifters to see if that solves the problem. The image on the
previous page shows the underside of a Freestyle keyboard with correctly-installed V3 V-lifters.
For technical support, first download the latest User’s Manual and view instructional videos for various
Freestyle products at the Kinesis website (http://www.kinesis.com/support/manuals.htm). If you still have
questions or problems, email Kinesis Technical Support ([email protected]), or call during business hours
(M-F, 8:00AM to 4:30PM Pacific Time).
Health Caution
Improper keyboard and/or mouse use may contribute to painful and permanent injuries. Read the Health
and Safety details on the bottom label of the keyboard. If you experience pain, weakness, numbness, or
tingling while or after using your computer, consult a qualified health professional for advice.
Warranty and Legal
Kinesis warrants these keyboard accessories to be free from defects in materials and workmanship and to
perform substantially in accordance with the Product documentation for two years from the date of pur-
chase. If Product fails due to accident, abuse, inappropriate use or normal wear, Kinesis shall have no re-
sponsibility under this Limited Warranty. For complete warranty details, see http://www.kinesis.com/
support/manuals.htm.
Kinesis and Freestyle are registered trademarks and Freestyle2, V3, and Pivot Tether are trademarks of
Kinesis Corporation. Patents are pending.
Kinesis Corporation
22030 20th Avenue SE, Suite 102
Bothell, WA 98021 USA
www.kinesis.com [email protected] phone: 800-454-6374 (USA only) 425-402-8100
4-27-12
Pivot tether Slide release button