sPOD 1997-2002 Instructions Center Bracket - Manual (Page 2)

3) Remove the passenger sun visor (photo 3).
Photo 3
4) Loosen, but do not remove the 3 attaching screws on the
passenger side pillar cover (photo 4).
Photo 4
5) Install the 5 supplied clips in the horizontal slots on the
windshield header. A flat blade screwdriver works great for
this (photo 5).
Photo 5
6) Install the switch panel in the new header cover with the
provided phillips head screws and feed the harness through
the passenger side (photo 6).
Photo 6
7) Mount the new switch & header assembly using the ¼"-20
screws provided in the kit (photo 7).
Photo 7