CompuSTAR RF-P2W902-SP (Remote 2W902R-SP) - Manual (Page 6)

11 By Firstech, LLC By Firstech, LLC 10
Alarm LED Notifications
In the event that your alarm has been triggered, your remote will receive notifications based on what zone has been violated. Please see the following
table for details and a short description of each notification. Please note that these notifications are only available with MAX IT and ALARM IT systems.
Remote LED Functions and Descriptions
Your remote will communicate to and from your vehicle while in range. The LED will change colors indicating transmission, confirmation, remote start
run time and error confirmations.
Event LED Color LED Duration Chirp(s)
Runtime Remaining: 100 Percent Blue Once every 5 seconds Six times
Runtime Remaining: 66 Percent Blue Once every 5 seconds N/A
Runtime Remaining: 33 Percent Blue Once every 5 seconds N/A
All command confirmations Blue Once or Twice depending on function
All error confirmations Blue Three LED flashes Three chirps
Once or Twice depending on
function
Zone LED Color Chirp(s) Description
Door Trigger(s) Purple and Red
Chirps for 30 seconds or until
One of more of your door trigger zones have been violated.
button tapped on remote
Trunk Trigger Purple and Red
Chirps for 30 seconds or until
Your trunk trigger zone has been violated.
button tapped on remote
Hood Trigger Purple and Red
Chirps for 30 seconds or unti
Your hood trigger zone has been violated.
button tapped on remote
Ignition On Trigger Purple and Red
Chirps for 30 seconds or unti Your alarm is triggered when your
button tapped on remote vehicle’s ignition is turned on.
DAS Tilt Trigger Purple and Red
Chirps for 30 seconds or unti Your alarm is triggered when your
button tapped on remote DAS detects tilt motion.
Prewarn Shock Sensor Blue and Red 8 Chirps Your prewarn shock sensor zone has been violated.
Full Shock Sensor Purple and Red
Chirps for 30 seconds or until
Your full trigger shock sensor zone has been violated.
button tapped on remote.