Apple iPod (with color display) User Manual

Page 41

Using iPod

• To set slides to show on PAL or NTSC televisions, set TV Signal to PAL or NTSC.

Note: PAL and NTSC refer to television broadcast standards. Your television may use

either of these, depending on the region where it was purchased. If you aren’t sure

which your television uses, check the documentation that came with your television.

To view a slideshow on iPod:

Select any photo, album, or roll and press Play. Or select any full-screen photo and

press the Select button. To pause the music and the slideshow, press the Play/Pause

button.

If you selected a playlist in Photos > Slideshow Settings > Music, the playlist plays

automatically when you start the slideshow. The photos advance automatically

according to settings in the Slideshow Settings menu. To skip to the next or previous

photo manually, press the Next/Fast-forward or Previous/Rewind button.

To connect iPod to a television:

Your television must have RCA video and audio ports, or an S-video port.

Connect the optional iPod AV Cable to the Headphones port on iPod.

You can also connect the iPod AV Cable to the Line Out port on the iPod Dock and put

iPod in the Dock. You must use an iPod Dock for iPod with color display. Other iPod

Docks won’t work.

Note: Use the iPod AV Cable made specifically for iPod. Other similar RCA-type cables

won’t work. You can purchase the iPod AV Cable at www.apple.com/ipodstore.

LL0354_UG.book Page 41 Thursday, March 3, 2005 4:44 PM