Boundless Technologies 4000 - Manual (Page 47)

32 Setup
PC TERM is only displayed as a terminal selection when the PC+ keyboard is
connected.
Terminal [ Viewpoint , Regent 40, Wyse 50, TVI 925, TVI 920, TVI 910, Hazeltine
1500, VT52, Wyse 75, VT100, PC-Term
Select the mode compatible to suit your system requirements.
Mode [Normal, Enhanced ]
Selecting Enhanced allows the additional features of the terminal to be accessed.
Selecting Normal provides the standard feature set of the terminal selected.
Program Keys [ Terminal Dependent , User Dependent]
When changing compatibility modes, selecting Terminal Dependent will set default
codes for all programmable function keys according to the emulation selected.
Selecting User Dependent will allow you to retain codes as programmed and will not
default to codes of the emulation selected.
At power up, default function keys will always be loaded unless User Dependent is
selected at this field.
Keyboards to Use [ PC+ or ASCII ]
This field highlights the keyboard supported for the emulation selected. No action
may be taken at this field.
If any keys have been programmed, changing terminal modes while Terminal
Dependent is selected will cause that. programming to be lost.
TAB Menu
EXEC1 GLOBAL COMM1 AUX/COMM2 KEYBOARD1 SCREEN1 VISUAL1 MODE1 TAB1 FUNCT1 BELL
10 20 30 40 50 60 70 80
+ ........ + ........... + ........... + ........... + ........... + ........... + ........... + ............ +
Space - clears tab
T - sets tab
C - clears all tabs
ENTER:menu ↑ ↓ :line ← → SPACE:select S-SETUP:exit CTL-SETUP:SES#1
Use the ← and → arrows to select a column position. The display will scroll to allow
you to access any column up to 132.
Space - Pressing the Space Bar clears the tab settings.
T - Sets a tab.
C - Clears all tab settings.