Basic remote functions, Pairing apple tv with a remote – Apple TV (1st generation) User Manual
Page 23
Chapter 3
Ready, set, watch.
23
Basic Remote Functions
Your Apple Remote has the basic functions described below.
Note: The ∂ and D on the Apple Remote don’t control the volume on your TV or
receiver. Use the remote that came with your TV or receiver to change the volume.
Pairing Apple TV with a Remote
The Apple Remote works with the built-in IR receiver on Apple TV. You can set Apple TV
to work only with the included remote by pairing Apple TV and the remote.
To pair Apple TV with the included remote:
1
Choose Settings from the Apple TV main menu.
2
Choose Pair Remote Control.
You can also press and hold » and ‘ for 6 seconds to pair Apple TV and the remote.
To
Do this
Move through the menu options
Press
∂
or
D
Select an option from a menu
Press
’
Return to a previous menu
Press
»
Return to the main menu
Press and hold
»
Put Apple TV in standby mode
Press and hold
’
for about 6 seconds
Reset Apple TV
Press and hold
»
and
D
for about 6 seconds
Pair Apple TV and a remote
Press and hold
»
and
‘
for about 6 seconds