Recall – BT STUDIO 2300 User Manual
Page 65
Access code and entering a pause
If you are connecting your BT Studio 2300 to a switchboard/PBX you may need to prefix
stored numbers with an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code.
PABX access code
1. Press
Menu
then scroll
to
Handeset
and press
OK
.
2. Scroll to
PABX access code
and press
OK
.
3. Display shows
Set Code
. Press
OK
.
4. Enter your PABX access code and press
Save
.
5. Scroll
to
ON
and press
OK
.
6. Press and hold
Back
to return to standby.
Entering a pause
A pause is entered when storing a number in the phonebook (see page 22) or PABX access
code by pressing and holding the
button until the display shows
P
.
Recall
The
(Recall) button is used when connected to certain switchboards (PBXs) and with
some BT Calling Features, or equivalent services available via your Network Provider.
R
Vol
General information
65
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
If you experience any problems, please call the Helpline on 0870 605 8047