BT STUDIO 2300 - Manual (Page 53)

Select base
You can switch your BT Studio handset between bases.
You can also set it to automatically select the base with
the strongest signal. The handset must first be registered
with each base individually and you must be in range of
the base unit.
1. Press Menu then scroll to Registration and press OK .
2. Scroll to Select Base then press OK . The current
base being used is highlighted.
3. Scroll or to select the base you want or Automatic
to connect to the base with the strongest signal. Press OK .
De-register a handset
Use one handset to de-register another handset from the
same base.
1. Press Menu then scroll to Registration and press OK .
2. Scroll down to De-Register . Press OK .
3. Enter the system PIN (original setting 0000) then press
OK . The screen lists all handsets registered to the base.
4. Scroll or to select the handset you want to
deregister and press OK .
5. Press Yes to confirm or No to return to the previous
screen listing the handsets.
Vol
Vol
Additional handsets and bases 53
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
If you experience any problems, please call the Helpline on 0870 605 8047