Apple Power Macintosh 7200 - Manual (Page 6)

2 Plug the socket end of the computer’s power cord into the recessed power socket
(marked with the symbol
≤
) on the back of the computer.
3 Plug the other end of the power cord into a three-hole grounded outlet or power strip.
IMPORTANT The only way to disconnect power completely is to unplug the
power cord. Make sure that at least one end of the power cord is within easy
reach so that you can unplug the computer when you need to.
Power cord plug Power cord socket
WARNING Be sure to set the voltage switch on the back of your computer
for the voltage system to which you’re connecting the computer.
This equipment is intended to be electrically grounded. Your Macintosh
is equipped with a three-wire grounding plug—a plug that has a third
(grounding) pin. This plug will fit only a grounded AC outlet. This is a
safety feature. If you are unable to insert the plug into the outlet,
contact a licensed electrician to replace the outlet with a properly
grounded outlet. Do not defeat the purpose of the grounding plug!
6 Chapter 1