Apple Power Macintosh 7200 - Manual (Page 16)

What’s next?
You’ve finished setting up your computer. Continue with one of the
following steps:
m If you are new to the Macintosh, turn to the next section, “Learning
the Basics.” When you’ve learned the basic Macintosh skills, turn to the
section “Saving Energy With the Energy Saver Control Panel” to learn how
to set energy-saving options for your computer.
m If you are an experienced Macintosh user, turn to the section “Saving
Energy With the Energy Saver Control Panel,” later in this chapter, to learn
how to set energy-saving options for your computer. Then turn to Chapter 2,
“Getting Help,” to learn about Macintosh Guide, your main source of
information when you’re working with the Macintosh.
m If you want to connect additional equipment, such as a microphone, to your
computer, see Chapter 3, “Connecting Additional Equipment,” for
instructions.
m If you want to install application software on your computer, see Chapter 4,
“Installing and Using Application Programs,” for information on setting up
your programs. You’ll need this information to properly set up any software
programs specifically designed for Power Macintosh computers.
IMPORTANT If you need to turn off your computer at any point, please see
“Turning the Computer Off” later in this chapter. It is very important to use
the correct procedure for shutting down your Macintosh before turning it off.
16 Chapter 1