Brookstone Virtual Keyboard 796246 User Manual

Page 19

Note: to exit calibration mode at any time, press the fN and C key, again.

No calibration information will be saved until the entire calibration mode has

been completed.

QuICK KeY refereNCe guIde

Bluetooth:

1 . Searching Last Device (Bluetooth icon blinking) .

2 . Searching New Device (Bluetooth icon blinking) .
3 . Successful Pairing (Bluetooth icon solid) .

4 . Disconnected (Bluetooth icon not visible) .

uSB Connection:

U will be displayed when USB cord is plugged into computer .

Bluetooth will have preference over the USB connection . Press FN and W on the

Virtual Keyboard to override and connect to USB, even when a previously paired

Bluetooth device is in range .

Adjusting Sound

(FN and S): Volume level bars will appear .

Adjusting Key-press Sensitivity

(FN and K): Sensitivity level bars will appear .

Adjusting Brightness

(FN and B): Brightness level bars will appear .

Calibration

(FN and C): Must press C twice – or holding on/off for 10 seconds

1 . Shows two icons on top flashing for user to hold the F1 and F12 keys on the

first row (beeps for success) . Hold down finger for 3 seconds .

2 . Shows two icons on bottom flashing for user to press the outside keys on the

bottom row (FN and right arrow) . Hold down fingers for 3 seconds (beeps for

success) then goes back to home screen .

irt

l K

5”

t:1

rin