Electra Verse Fender Set (350114, 350113) User Manual
Page 4
STEP 2: Installation of rear fender
1)
2)
3)
Place bicycle in stand (if available) and
remove rear wheel.
Remove rear brake mounting bolt from back
side of caliper using 5mm hex wrench. Be
sure not to lose any hardware.
Hold rear fender in rear triangle and line up
placement. Fender mounting slot should be
lined up and centered.
Attach lower fender mount to kickstand plate
using M5x11mm machine screw, tighten.
While holding fender in place, note
orientation of fender to brake bridge.
STEP 2:1
STEP 2:2
ELECTRA BICYCLE COMPANY , LLC. • 3270 CORPORATE VIEW, SUITE A, VISTA, CA 92081
TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • ELECTRABIKE.COM
STEP 2:3