Hornady Case Tumbler - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions
Reloading is an enjoyable and rewarding experience. This case tumbler will add to the
quality of your reloaded ammunition. It has been designed from the beginning with the
user’s safety in mind.
As with any mechanical device, safety rules must be followed. By observing these rules,
the chance of a hazardous occurrence becomes extremely remote.
GENERAL
Use the equipment as the manufacturer recommends. •
Study the instructions carefully and become thoroughly familiar with the operation •
of the tool. Don’t take short cuts.
Observe “good housekeeping” in the reloading area.
•
Keep tools and components neat, clean and orderly. •
Wear adequate eye protection. •
WARNINGS
Read this instruction manual thoroughly before attempting to operate this product. •
Do not use any chemicals other than those specifically recommended by the •
manufacturer for cartridge case cleaning.
Do not attempt to salvage badly corroded cases which might be structurally weak.
•
Do not attempt to clean loaded ammunition under any circumstances. •
ELECTRICAL
The 110VAC unit is equipped with a three prong grounded cord. The 220VAC unit is •
equipped with a European two prong round cord. Plug only into a proper outlet.
Do not work on wet floors.
•
Do not plug into electrical outlet until the proper voltage is supplied. •
Keep all electric cords away from moisture, rain and moving parts. •
Periodically check all cords for worn/frayed spots and replace or repair to code if needed. •