Hornady Universal Blank Dies - Manual (Page 4)

7.
If a finish crimp is necessary to close
the case mouth, remove Crimp Start Die
from the press continue with step 8.
8.
Repeat steps 1-6 using the crimped
cartridge case with the Finish Crimp
Die until cartridge case mouth is closed
enough for the desired blank round.
Please Note: Adjustments can be made
to the amount of crimp start and finish to
obtain the ideal round. For example, if too
much of either start or finish crimp force is
applied to the cartridge case, it may bulge
and not chamber properly.