PureFlow AirDog DF-165 - 6.4L Ford 2008-2010 - Manual (Page 9)

9
AirDog
®
II Ford PowerStroke 2008 - 2010 6.4L
Section 4 AirDog ® II & Mounting Brackets
Installing the AirDog
®
II & Mounting Brackets on the
Truck’s Frame.
FUEL IN ENGINE
4-1 Install a 1/2” male J2004 quick connect x
3/8” NPTF (08J2044-3/8NPT) into the
“ENGINE” and “FUEL IN” ports in the
AirDogII®.
Figure 2
4-2. Install the 3/8” male J2004 quick connect x 1/8” NPTF (06J2044-1/8NPT) into the tank
port of the AirDog II. The tank port is the smaller port next to the “ENGINE” port.
Figure 3
WARNING: The NPT fitting threads must be lubricated with oil or anti-seize compound
before installation to prevent galling!
Figure 4 Figure 5
4-3. Assemble the AirDog®II mounting bracket to the frame bracket.
Figure 5a Figure 6 Figure 7
4-4. Use the spacer block to clear lines and wiring on the frame.
4-5.
Attach the AirDog®II to the frame bracket assembly.
Figure 8