PureFlow AirDog RP-150 - Dodge Cummins 1994-1998 - Manual (Page 6)

6
PureFlow AirDog
Raptor
™
100 & 150 1994 - 1998 Dodge Cummins
Section 2 Safety Guidelines
Raptor
™
MODEL RP-100 & RP-150
The installation of the Raptor
™
Fuel Pump can be made relatively easy by following the steps
outlined in this manual.
1. Inventory the package components completely. Notify PUREFLOW AIRDOG.
immediately of any parts missing or damaged.
2. Read the installation manual and understand how the system operates before beginning
installation.
3. The installation recommendations contained herein are suggested installation
guidelines only. Individual installations may vary.
4. If any installation procedure is uncertain, contact PUREFLOW AIRDOG. for technical
assistance.
NOTE: some of the pictures used in this manual are for example only and may not picture a
component exactly the same as found in your truck.
SAFETY GUIDELINES!
CAUTION:
Proper location of the Raptor™ on the vehicle is essential. Consider
hazards presented to the equipment by road debris and the elements.
CAUTION: Chock the vehicle’s tires to prevent rolling.
CAUTION:
Disconnect the battery cables to both batteries before proceeding with the
Raptor™ Fuel Pump installation.
CAUTION: Vehicle frame rails should not be drilled into or welded upon.
CAUTION: Wear safety glasses when operating power tools such as drills and grinders
or when using a punch or chisel.
CAUTION: Use common sense when routing fuel lines and electrical harnesses. Keep
them away from hot exhaust components and/or moving parts. Properly
secure lines to prevent chaffing.
Use Good Judgment and Common Sense When Installing the Raptor™!