5 stereo operation plus 2 subwoofers – Behringer UltraDrive Pro DCX2496 User Manual
Page 22
![background image](/manuals/54605/22/background.png)
22
ULTRADRIVE PRO DCX2496 User Manual
6.5 Stereo operation plus 2 subwoofers
Output 5 + 6 usable as additional mono delay line outputs.
XENYX X2222USB Mixing console
Left
In A
Out 1 2
3
4
(5 and 6 not used)
EUROPOWER EP2000
Stereo power amplifier
EUROLIVE
B1220 PRO
Left passive
loudspeaker
Right passive
loudspeaker
In B
Stereo output
Right
High (2)
High (4)
EUROLIVE B1800X PRO
Left active subwoofer
Right passive subwoofer
Low (3)
Low (1)
Fig. 6.5: Stereo operation plus 2 woofer cabinets
Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end
and are fine-tuned in their sound with the DCX’s internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer
cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.