Fast & Fluid X-Smart - Manual (Page 16)

Operator manual X-Smart V 1.2
16
2. When the brush is too dirty and does not clean the nozzle of
the canister, rinse and clean the brush. See § 3.3.3.
3. When the nozzles are too dirty, clean the nozzles individually
with a damp cloth. See § 3.3.4.
3.3.3 Cleaning the brush unit: daily
The brush unit removes the excess colorant from the nozzles.
The brush unit consists of a brush container and a removable
brush that rotates. The brush unit is installed in a bracket with a
click connection.
It is advised to replace the brush unit every 4 months to ensure
optimal performance. Replacement brush units are provided in
the X-Smart Maintenance Kit.
1. Slide the brush unit (A) out of the bracket (B).
2. Remove the rotary brush (C) from the brush container (D).
3. Remove the fluids from the brush container.
4. Rinse and clean the static brushes (E).
5. Rinse and clean the rotary brush.
6. Place the rotary brush back in the brush container.
Note
If you do not clean these items daily, mistinting
might occur.
A
B
C
D
E
E
Note
For the disposal of the fluids, follow the local
regulations.