Fast & Fluid X-Smart - Manual (Page 14)

Operator manual X-Smart V 1.2
14
3.2.2 Placing a can
1. Check the height of the can.
2. Place the can table (A) in the correct slots for the correct
height.
3. Place the can (B) at the center of the mark (C) on the can
table.
3.2.3 Using the emergency stop switch
1. Push the emergency stop switch (A). The machine stops
immediately.
2. Solve the problem as quickly as possible.
3. Reset the emergency stop switch by turning the emergency
stop switch. The machine restarts automatically.
D
E
C
B
A
Note
The correct height of the can table depends
on the height of the can.
CAUTION
Make sure that the can table is secure.
CAUTION
Make sure that the can does not touch the
turntable (E). Keep enough free space.
Note
Make sure that the can sensor (D) is able to
detect the can.
A
1
2
CAUTION
Only push the emergency stop switch in the
case of a safety emergency. Do not use the
emergency stop switch as an on/off function!
CAUTION
When the machine is shut down, the stirring
mechanism, which is necessary to keep the
colorant in optimal condition, is also shut
down.
Note
After the reset, the machine is operational
when you hear two 'beeps'.