Wheel, leg & lifting handle assembly, Hose and regulator assembly – L.B. White 170 Dual Fuel User Manual

Page 10

SPACER

WASHER 5/16 (QUANTITY 8)

HANDLE - U, WITH 8" LEGS

HUB CAP (PRESS ON)

NUTS 5/16-18

(2 PER SIDE)

INSTALL CAGE NUTS AS SHOWN

BEFORE BOLTING

SUPPORT TO HEATER

REMOVE CASE SCREW AT EACH

END OF HEATER (BOTH SIDES)

BEFORE INSTALLING U-HANDLES.

HANDLE - U

WITH 8 1/2" LEGS

AND AXLE HOLE

1 BOLT 5/16-18 X 1"

AND 1 WASHER 5/16"

AT EACH END

BOLTS 5/16-18 X 1"

(QUANTITY 10)

COTTER

PIN

See Fig. 4 for assembly of components. Ensure all
hardware is tightened securely.

WHEEL, LEG & LIFTING HANDLE ASSEMBLY

FIG. 4

HOSE AND REGULATOR ASSEMBLY

GAS VALVE INLET

HOSE

REGULATOR

PROPANE USE

ONLY

HOSE ADAPTER

HOSE

REGULATOR

When propane fuel is to be used, connect the POL
fitting, spring, and bushing to the regulator inlet.

FIG. 5

Connect rigid end of hose to regulator outlet.
Connect other end to hose adapter at heater. Tighten
securely. See Fig 5.

Store hose and regulator as shown in Fig. 6.

FIG. 6