L.B. White 170 Premier - Manual (Page 11)

11
RIGID END
SWIVEL END
ADAPTER
1. Connect rigid end of hose to regulator outlet. Connect
other end to hose adapter at heater. Tighten securely.
See Fig 6.
FIG. 6
2. The hose may be coiled up and hung on the hose
hanger as shown in Fig. 7.
3. For Premier 170 heaters, store the regulator in the
storage bracket (Fig. 7) when the regulator is not in
use.
FIG. 7
HOSE AND REGULATOR ASSEMBLY
POWER CORD
HEAVY DUTY
EXTENSION CORD
WITH GROUND
SERIES TAP PLUG
THERMOSTAT
1. Connect male plug on heater into female side of
series tap plug on thermostat. See Fig. 8.
2. Plug male side of series tap plug into grounded,
heavy-duty, electrical extension cord. Plug extension
cord into approved electrical outlet.
FIG. 8
THERMOSTAT ASSEMBLY
REGULATOR IN
BRACKET