Steele Products SP-CE358TM - Manual (Page 22)

22
Owner’s Manual
Compressor (cont’d)
OPERATING INSTRUCTIONS
WARNING! High temperatures are generated by the electrical motor and
the pump. To prevent burns or other injuries, do not touch the compressor while
it is running. Allow It to cool before handling or servicing. Keep children away
from the compressor at all times.
WARNING! When adjusting from a higher to a lower pressure, turn the
knob counterclockwise to reach the desired pressure. Do not exceed operating
pressure of the tool or accessory being used.
5. Adjust the regulator to the working pressure of the tool. (never exceed 90 PSI)
Shut down
1. Turn the power switch to the OFF position.
2. Unplug the power cord.
3. Reduce pressure in the tank thorough the outlet hose .You can also pull the relief
valve ring and keep it open in the tank.
WARNING! Escaping air and moisture can propel debris that may cause
eye injury. Wear safety goggles when opening petcock.
4. Tip the compressor (if necessary for your model ) so the petcock is at the bottom of
the tank(S).Then open the petcock to allow moisture to drain from the tank.
Thermal Protector
When the motors temperature is to high, the thermal protector will shut the motor OFF.
After the motor cools down, it will restart the motor automatically preventing the motor
from being damaged.