ARB 4450010 User Manual

Arb tj jeep rocker guards

Text mode
Original mode

1 December 2005

Page 1 of 8

3783189

If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.

Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807

WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190

ARB TJ JEEP ROCKER GUARDS

• PART No 4450010

TOOLS REQUIRED:

• Electric Drill
• Pop-Rivet Gun
• Floor jack or a friend
• 1” (25mm) Hole Saw
• 9/32” (7.14mm) Drill Bit
• 3/16” (4.76mm) Drill Bit
• 10mm Wrench or Socket
• ¼” Transfer Punch
• Hammer