Assembly sequence for bullbar – ARB 3413050 User Manual
Page 10
03/12/04 Page 10 of 11 3782893
ASSEMBLY SEQUENCE FOR BULLBAR.
19.
Before
1. Remove the two bolts in the base of the control box
and reposition them into the more centralised holes
After
20.
1. Place the 4 solenoids over the 2 metal stands that are
facing upwards. Make sure they line up with the holes in
the base.
21.
1. Replace the 2 cap screws, washers and nuts removed
in step 17 above into original holes.
2. Replace the black cover and refit the three cover
screws (DO NOT OVER TIGHTEN)
See also other documents in the category ARB For the car:
- RD153 (40 pages)
- RD139 (36 pages)
- RD93 (34 pages)
- RD101 (46 pages)
- RD100 (46 pages)
- RD104 (46 pages)
- RD103 (46 pages)
- RD102 (46 pages)
- RD105 (46 pages)
- RD125 (42 pages)
- RD117 (44 pages)
- RD116 (44 pages)
- RD113 (42 pages)
- RD147 (44 pages)
- RD109 (42 pages)
- RD158 (44 pages)
- RD158 (38 pages)
- RD166 (42 pages)
- RD168 (44 pages)
- RD115 (44 pages)
- RD80 (44 pages)
- RD82 (40 pages)
- RD81 (40 pages)
- RD119 (40 pages)
- RD99 (40 pages)
- RD83 (44 pages)
- RD84 (44 pages)
- RD132 (40 pages)
- RD05 (38 pages)
- RD12 (44 pages)
- RD114 (36 pages)
- RD40 (38 pages)
- RD197 (42 pages)
- RD94 (40 pages)
- RD44 (46 pages)
- RD85 (42 pages)
- RD127 (40 pages)
- RD128 (40 pages)
- RD138 (40 pages)
- RD20 (44 pages)
- RD32 (44 pages)
- RD110 (42 pages)
- RD106 (48 pages)
- RD107 (48 pages)
- RD136 (42 pages)