ARB 3413050 - Manual

03/12/04 Page 1 of 11 3782893
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA: (08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
ARB WINCH/NONWINCH BULLBAR
TO SUIT HJ100 IFS
PRODUCT No. 3413050 (Pre 09/2002)
WARNING
FOR VEHICLES EQUIPPED WITH SRS AIRBAG
WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE
FRONT
PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE
INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED.
• IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT,
CONTACT YOUR NEAREST AUTHORISED ARB STOCKIST. REPAIRS OR
MODIFICATIONS TO THE IMPACT ABSORPTION SYSTEM MUST NOT
BE ATTEMPED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL,
OTHER THAN THOSE SPECIFIED BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
IMPORTANT
• This bull bar is suitable for Warn 9000lb, 9500lb High Speed,
10000lb, and 12000lb winches. Note: if fitting a 10000lb or 12000lb
winch cable kit 6171397 is required.
Tools Required
10mm, 14mm, 18mm, 19mm, 22mm Spanners and Sockets. Phillips head screwdriver, hacksaw, drill
& 10mm drill bit.
Optional Extras suited for this bar includes a range of IPF driving lights and
durable driving light covers. Contact your nearest ARB stockest for further
information.