3 installing the air locker, Reinstalling differential and axles – ARB RD87 User Manual

Page 23

Text mode
Original mode

3 Installing the Air Locker

3.10

Reinstalling Differential and Axles

c Replace the paper gasket on the axle housing flange.
c Reinstall the third member to the differential housing according to

your vehicle service manual.

c Reinstall the drive shaft.
c Replace the axle seals if necessary and fit to the axles.
c Insert both axles fully into the housing, engaging splines, and then

gently tap them inward.

NOTE : Be careful not to damage the axle shaft oil seals when

installing the axle. Support the axle’s entire weight
where possible.

c Torque down the axle bolts to manufactures specifications.