2 removing the existing differential, Removing the differential carrier, Carefully remove the differential carrier – ARB RD99 User Manual
Page 11
2 Removing the Existing Differential
9
2.6
Removing the Differential Carrier
Remove both adjuster nut locking tabs.
Loosen both bearing caps.
Using the appropriate adjuster nut wrench, loosen the adjuster
nuts at least half a turn.
Remove the bearing caps, adjuster nuts, and tapered roller bearing
cups.
Carefully remove the differential carrier.
NOTE :
The differential carrier is heavy and quite difficult to
handle when covered in oil. Take care not to drop it.
See also other documents in the category ARB For the car:
- RD153 (40 pages)
- RD139 (36 pages)
- RD93 (34 pages)
- RD101 (46 pages)
- RD100 (46 pages)
- RD104 (46 pages)
- RD103 (46 pages)
- RD102 (46 pages)
- RD105 (46 pages)
- RD125 (42 pages)
- RD117 (44 pages)
- RD116 (44 pages)
- RD113 (42 pages)
- RD147 (44 pages)
- RD109 (42 pages)
- RD158 (38 pages)
- RD158 (44 pages)
- RD166 (42 pages)
- RD168 (44 pages)
- RD115 (44 pages)
- RD80 (44 pages)
- RD82 (40 pages)
- RD81 (40 pages)
- RD119 (40 pages)
- RD83 (44 pages)
- RD84 (44 pages)
- RD132 (40 pages)
- RD05 (38 pages)
- RD12 (44 pages)
- RD114 (36 pages)
- RD40 (38 pages)
- RD197 (42 pages)
- RD94 (40 pages)
- RD44 (46 pages)
- RD85 (42 pages)
- RD127 (40 pages)
- RD128 (40 pages)
- RD138 (40 pages)
- RD20 (44 pages)
- RD32 (44 pages)
- RD110 (42 pages)
- RD106 (48 pages)
- RD107 (48 pages)
- RD136 (42 pages)